Construction guidelines for laboratories (I) Internal Wall 实验动物 设施内部的墙面应采易平整、防潮、无吸附性、耐撞击、无缝隙的隔间建材。 1. The wall inside the laboratory animal facility should be made of easy-to-level, moisture-proof, non-absorptive, impact-resistant, seamless compartment building materials. The joints with door frames, ceilings and floors should be tightly jointed with flat jointing materials. 2. The surface coating should be able to withstand cleaning, disinfectant cleaning and can withstand high pressure washing. 设备撞击处的墙面及凸出之墙角，应以恰当之防撞护板加以强化。 Walls that are susceptible to the impact of equipment such as cages and carts and protruding corners should be reinforced with appropriate anti-collision shields. 3. It is not appropriate to expose water pipes, air pipes or other lines on the wall, because the surface is not easy to clean. (B) the floor 验动物 设施的地面建材更应要求防潮、不会吸收化学物质、耐重压、平坦等。 1. Basically, the floor building materials of experimental animal facilities should be moisture-proof, not absorb chemical substances, resistant to heavy pressure, and flat. The floor of common laboratory animal facilities are mostly building materials with one-piece molding or few joints, such as polymer polymer esters, high-hardness concrete cement, rubber-containing polymers, etc. 求的另一要素。 Of course, the correct construction method is another element to ensure that the ground meets the requirements . 应较粗糙，以免工作人员或动物滑倒，这类区室之地面材质也不应采用会与粪、尿等排泄物或其他生物性物质产生化学作用者；且应为能够抗热水 或 清洁剂侵蚀者。 2. The floor of the compartments that are often humid or pen-fed animals (such as economic animals) should be rough to prevent the staff or animals from slipping. Other biological substances produce chemical action; and should be able to resist hot water or detergent attack. 若地面具有门坎，则应采不会阻碍搬运笼架、推车等设备经过者。 3. If there is a sill on the ground, it should be used so as not to hinder the passage of equipment such as cages and carts.
Chongqing Golmo Technology Co., Ltd. regards "customer satisfaction as the sole criterion for evaluating our work" as its service tenet, and always adheres to the needs and satisfaction of customers as its core.
Service Hotline: 023-62618000